Cabinets & millwork takeoffs

Cabinets, countertops, and millwork, counted by room.

Send your cabinets & millwork plans. Get a CSI-coded, Excel-ready quantity schedule — measured from the drawings, with ambiguities flagged for review.

Vector PDF or DWG only · 6 measured item types · Fixed pricing below

At a glance

What’s included in cabinets & millwork.

  • Base cabinets by size and typeEA / LF
  • Wall cabinets by size and typeEA / LF
  • Tall cabinets and pantry unitsEA
  • Countertops by areaSF / LF
  • Trim, panels, and end panelsLF / EA
  • HardwareEA
Simple, project-based pricing

Fixed per project. No subscription.

Pick the tier that fits this plan set. Cabinets & millwork can be scoped as one trade or included in a multi-trade schedule.

One Trade
$49fixed / project

One trade on this plan set, with a clear, Excel-ready quantity schedule.

  • AI-assisted quantity takeoff
  • CSI-coded line items and units
  • Ambiguities flagged for review
Choose One Trade

No surprises.

Multi-Trade + Review
$249fixed / project

Multi-trade takeoff plus review by an estimating professional.

  • Everything in Multi-Trade
  • Quantity, unit, scope checks
  • Flagged details reviewed
Choose Multi-Trade + Review

No surprises.

All prices in USD. Fixed per project — no per-seat licences, no custom quotes. See a real schedule.

Common misses

Handled or flagged.

  • Cabinets counted from the plan alone: A plan shows the footprint, but not the height or the door count. Base and wall units differ in height and in how many doors and drawers they have. We count from the elevations, not the plan.
  • Countertop area without the cutouts: Sink and cooktop cutouts reduce the countertop area, and they are dimensioned on the countertop plan. Without them the area is overstated. We net the cutouts out where they are shown.
  • Filler and scribe left out: Gaps at walls and at odd corners need filler and scribe. They are often in the cabinet details rather than the schedule. Leaving them out causes a short order and extra trips on site. We check the details for every wall run.
FAQ

Quick answers.

Do you count by room?
Yes. The schedule is grouped by room and elevation, which is how a cabinet order is usually checked against the layout drawing.
Do you net out sink and cooktop cutouts?
Yes, where the countertop plan dimensions them. Cutouts that are not dimensioned are flagged on the countertop line.
Can you count hardware?
Yes, when the hardware schedule is in the plan set. Hardware is counted per door and per drawer, so the order matches the cabinet count.
Do you check the cabinet layout against the appliances?
No. The schedule measures what the drawings show. Appliance clearances and layout decisions stay with the designer and the installer.
Ready when you are

Send cabinets & millwork plans.

Upload vector PDF or DWG files. We’ll confirm scope before you pay for review. See pricing.

Send cabinets & millwork plans