Porch & railing takeoffs

Porches, stairs, and railings, measured run by run.

Send your porches & railings plans. Get a CSI-coded, Excel-ready quantity schedule — measured from the drawings, with ambiguities flagged for review.

Vector PDF or DWG only · 7 measured item types · Fixed pricing below

At a glance

What’s included in porches & railings.

  • Columns and postsEA
  • Beams, headers, and raftersLF / EA
  • Stairs by rise, run, and widthEA / LF
  • Guardrail and handrail lengthLF
  • Balusters and infillEA
  • Newel posts and bracketsEA
  • Porch decking and ceilingSF
Simple, project-based pricing

Fixed per project. No subscription.

Pick the tier that fits this plan set. Porches & railings can be scoped as one trade or included in a multi-trade schedule.

One Trade
$49fixed / project

One trade on this plan set, with a clear, Excel-ready quantity schedule.

  • AI-assisted quantity takeoff
  • CSI-coded line items and units
  • Ambiguities flagged for review
Choose One Trade

No surprises.

Multi-Trade + Review
$249fixed / project

Multi-trade takeoff plus review by an estimating professional.

  • Everything in Multi-Trade
  • Quantity, unit, scope checks
  • Flagged details reviewed
Choose Multi-Trade + Review

No surprises.

All prices in USD. Fixed per project — no per-seat licences, no custom quotes. See a real schedule.

Common misses

Handled or flagged.

  • Railing length measured in plan only: A plan shows the railing line, but the rail rises with the stair and turns at each post. Measuring it flat under-counts the length. We measure the rail from the elevation and stair section so the slope is included.
  • Balusters counted without the code opening rule: Residential guard rules generally limit openings so a 4-inch sphere cannot pass through (IRC R312.1.3). Stair guards allow larger openings: up to 4-3/8 inches for the infill beside the stair, and up to 6 inches in the triangle under the rail. A single spacing applied everywhere gives the wrong count at stairs. We count balusters by run and check against the local code that applies.
  • Stair count off by one: The number of risers is set by the rise and run, and a landing changes the count. A stair counted from the plan alone can be a riser short. We count from the stair section and check the rise against the total height.
FAQ

Quick answers.

Do you measure the railing along the slope of the stair?
Yes. Railing on a stair is measured from the elevation or stair section so the rail length follows the slope, not the flat plan line.
Do you count balusters and infill?
Balusters are counted from the rail length and the spacing shown, with the rule applied for each run. Other infill patterns are measured by area and shown on their own line.
Can you handle a roofed porch?
Yes, when the roof framing is part of the plan set. Roof members, columns, and beams are kept in separate groups so the roof and the support are each priced correctly.
Do you check the railing height and guard requirements?
No. The schedule measures the railing shown on the drawings. Guard height and baluster spacing requirements are set by the code and the authority having jurisdiction, and remain their decision.
Ready when you are

Send porches & railings plans.

Upload vector PDF or DWG files. We’ll confirm scope before you pay for review. See pricing.

Send porches & railings plans